AN8014S |
RFQ for AN8014S Required Field |
 |
| Technical/Catalog Information | AN8014S-E1 |
| Vendor | Panasonic - SSG (VA) |
| Category | Integrated Circuits (ICs) |
| Type | Step-Down (Buck), Step-Up (Boost), Inverting |
| Number of Outputs | 1 |
| Voltage - Input | 3.6 ~ 34 V |
| Voltage - Output | Up to 35V |
| Current - Output | ± 1A |
| Power - Output | 143mW |
| Package / Case | 16-SOIC |
| Packaging | Cut Tape (CT) |
| Internal Switch(s) | Both |
| Synchronous | No |
| Rds (On) | - |
| Operating Temperature | -30°C ~ 85°C |
| Frequency - Switching | 500kHz |
| Lead Free Status | Contains Lead |
| RoHS Status | RoHS Non-Compliant |
| Other Names | AN8014S E1 AN8014SE1 AN8014SE1CT ND AN8014SE1CTND AN8014SE1CT |
| Product | Manufacturers | Pack | D/C |
| AN8014S | - | SOP/16 | 00+ |
Typical Application |
Features |
| · DC-DC switching power supply | · Wide operating supply voltage range (3.6 V to 34 V)(The voltage is limited within a range between 3.6V and 17 if it is connected to a step-down voltagecircuit.)· Totem pole output circuit: output peak current (±1 A)· On-chip pulse-by-pulse overcurrent detection andprotection circuitThreshold voltage VCC - 0.095 V typical· On-chip bootstrap circuit (allowing n-channel MOSFET direct driving.)· On-chip under-voltage lock-out circuit (U.V.L.O.)· On-chip on/off function (active-high control input, standby current of maximum 5 mA)· On-chip timer latch short-circuit protection circuit· Maximum oscillator frequency (500 kHz) |
| Parameter | Symbol | Rating | Unit |
| Supply voltage | VCC | 35 | V |
| Supply current | ICC | - | mA |
| Power dissipation *2 | PD | 143 | mW |
| Operating ambient temperature *1 | Topr | -30 to +85 | °C |
| Storage temperature *1 | Tstg | -40 to +125 | °C |
| On/off pin allowable application voltage | VON/OFF | VCC | V |
| Error amplifier allowable input voltage | VI | - 0.3 to VREFt | V |
| DTC pin allowable application voltage | VDTC | - 0.3 to VREFt | V |
| Out pin allowable application voltage | VOUT | 35 | V |
| Out pin constant output currentt | IO | ±100 | mA |
| Out pin peak output current | IO(Peak) | ±1 000 | mA |
| CB pin allowable application voltage | VCB | 35 | V |
| CB pin constant output current | ICB | -100, 150, | mA |
| CB pin peak output current | ICBP | -500, 1 000 | mA |
| CLM pin allowable application voltage | VCLM | VCC | V |
